Local manufacturing capabilities in Poughkeepsie, NYOur shop · Videos · About · Contact · Call 845-402-6318

Home / Applications / Food & beverage water reuse

Food & beverage · water reuse

Reuse water in your food or beverage plant, starting with the easy wins.

Bottle and can rinse water, evaporator condensate and treated effluent are the water most food and beverage plants can reuse first. They go to cooling towers, boilers, washdown and CIP pre-rinse. Scrub UF is the particle and microbe barrier, with RO and disinfection after it where the use needs them.

Submerged ultrafiltration in a tank

The problem

Why food & beverage water reuse projects stall.

“Water and sewer bills keep climbing.”

Every gallon recycled to utilities is a gallon not bought and not discharged.

“We’re not sure what we’re allowed to reuse.”

Food-safety rules, widely documented in industry literature, require that water reused for washing, rinsing or conveying food be safe and sanitary and not increase contamination. Industry guidance starts with non-product-contact uses and fit-for-purpose treatment.

“Our RO for reuse fouls fast.”

UF permeate with SDI typically below 4 and turbidity often below 0.1 NTU gives the RO a stable feed.

“We don’t want more chemicals or backwash.”

Scrub UF often runs without coagulant and has no backwash system.

Where Scrub UF fits

Typical trains.

GoalExample train
Rinse water to utilitiesBottle/can rinse → Scrub UF → cooling tower or boiler RO
Treated effluent polishingMBR or clarifier effluent → Scrub UF → RO → utility water
Washdown and CIP pre-rinseScrub UF → RO → disinfection, with regulator review
Hot condensateHot or oily condensate goes to ceramic instead of polymer

At a glance

What the membrane does.

ItemScrub UF (typical)
MembranePVDF thin-film composite flat-sheet ultrafiltration, on PET non-woven with a PP filtrate channel, about 0.04 µm nominal pore size. Same membrane family as Swing; the difference is mechanical scrubbing rather than swing/scour cleaning
Fouling controlCirculating scrubbing media wipes the sheets while they run. No backwash pump, tank or cycle
Design flux9–12 GFD (15–20 LMH); peak 15 GFD (25 LMH)
PermeateTurbidity typically below 1 NTU, often below 0.1 NTU; SDI typically below 4
Recovery90% or better, depending on feed and concentrate handling
Chemical cleanOften every few weeks to about 1–2 months on suitable feeds

Typical values from reference installations, test data and design studies. Your proposal sets the design point and any guaranteed values for your water.

Projects like these

Reference results on similar water.

From reference installations, tests and design studies. Names and sites are withheld. Results on other water will differ, and we confirm by pilot.

Storm water to RO

Scrub UF in place of coagulation, clarification and media filters ahead of RO.

Industrial process-water reuse

Ultrafiltration followed by NF or RO for process water, cooling tower makeup and boiler feed.

Design study, low-solids process water

One engineering design study, about 264,000 gpd (1,000 m³/d) of pretreated low-solids industrial water: specific energy about 0.5 kWh/kgal (0.13 kWh/m³) for Scrub UF versus about 1.4 kWh/kgal (0.36 kWh/m³) for pressurized UF. Not a guarantee. Chemical cleaning about every 1–2 months in that study.

Packaged units

Sizes from 861 to 11,300 ft² (80 to 1,050 m²).

ModelMembrane areaDesign permeate*
Scrub-UF80861 ft² (80 m²)5–7 gpm · 7,800–10,300 gpd (29–38 m³/d)
Scrub-UF260-12,800 ft² (260 m²)17–23 gpm · 25,200–33,600 gpd (94–125 m³/d)
Scrub-UF350-13,770 ft² (350 m²)24–31 gpm · 33,900–45,200 gpd (126–168 m³/d)
Scrub-UF260-25,600 ft² (520 m²)35–47 gpm · 50,400–67,200 gpd (187–250 m³/d)
Scrub-UF350-311,300 ft² (1,050 m²)71–94 gpm · 101,700–135,600 gpd (378–504 m³/d)

*Design permeate at 9–12 GFD (15–20 LMH), peak 15 GFD (25 LMH). Larger plants use multiple units or a multi-cell tank, confirmed per project. Units are assembled in Poughkeepsie, NY.

Try it first: the Scrub-UF80 ships as a unit to buy or rent for a pilot on your own water. Rentals

Honest selection

What UF will and won’t do here.

High-strength plant wastewater needs biological treatment first. See food processing and dairy wastewater for the MBR step. Any reuse that touches product or product-contact surfaces needs a validated, monitored train and regulator review.

What to send

Water first.

  • Which streams: rinse, condensate, treated effluent
  • Flow, temperature (°F), TSS, turbidity, BOD/COD
  • Target use: cooling, boiler, washdown, CIP
  • Current water and sewer cost
  • Food-safety plan constraints

Quick quote · 1 minute

Send us the stream.

Only your name and email are required. We reply from tom@zyramic.com, usually within one business day. Or call 845-402-6318.

Call 845-402-6318

Related

Ceramic for food & beverage / CIP recovery · Food processing wastewater · UF for industrial water reuse

We presently have a manufacturing facility in Poughkeepsie, New York, and the ability to ship from Europe and Asia.

Warranty against defects in materials and workmanship. For industrial applications, membrane life depends on the service duty, so we run a pilot test to establish expected system life.

Tell us your domestic-content requirements, including Build America, Buy America (BABA), and we'll review what we can document.

Zyramic, Inc.
14 Tucker Dr, Suite 4, Poughkeepsie, NY 12603
845-402-6318 · tom@zyramic.com

Scrub UF catalog Rev03 (PDF) · Scrub UF data sheet (PDF)

Call 845-402-6318Get a quote